Seamless Finish

Liquid Waterproofing Membrane

Spray and roller-applied liquid membrane for roofs, terraces and curved surfaces. Because it goes on seamless there are no joints waiting to fail, and it stays flexible enough to bridge the hairline cracks that open up as a building moves.

Get a free inspection +91 99875 06070

Liquid Waterproofing Membrane carried out in Thane & Mumbai — Mahadev Waterproofing

The method

How we actually do it

Waterproofing almost always fails at the small details rather than the big ones, so we follow the same sequence on every job. Here it is, and you’re welcome to hold us to it.

Surface ground and vacuumed clean
A primer matched to the substrate
Two coats of liquid membrane, with fabric reinforcement at the joints
Dry-film thickness checked before sign-off

Named on your quotation

Dr. Fixit
BASF
Pidilite
Asian Paints
STP
Nerolac
Sika
Fosroc

Next step

Get a quote for liquid waterproofing membrane

You get a free site inspection, a written diagnosis and an itemised price, usually within a day of ringing us.

Warranty: 10 years, in writing
Site visit: Free, usually same day
Areas covered: Thane, Mulund, Ghatkopar, Andheri & Mumbai
Experience: Since 2008, 500+ projects

Ask about liquid waterproofing membrane

We’ll call you back within a couple of hours, as long as it’s during working hours.

Questions

Liquid Waterproofing Membrane: the questions we get asked

These are the ones that come up on the phone most weeks. If yours isn’t here, ring us and ask it — we’d rather answer it before you book than after.

What makes a liquid membrane different from a coating?

Film thickness and elasticity. A liquid membrane is applied at a specified dry-film thickness and stays flexible enough to bridge hairline cracks; a decorative coating is a fraction of that and cracks with the substrate.

Is it walkable afterwards?

For maintenance access, yes. For a terrace in daily use we add a protective screed or a topcoat rated for foot traffic.

How do you check it has been applied thick enough?

We take dry-film thickness readings before sign-off. Under-application is the single most common reason a liquid system fails early, so it is worth insisting on that check whoever does your work.

Areas we cover